Home > Radio Control >

MULTIMODE TECHNOLOGIES HC... NOISE SINK HC
MULTIMODE TECHNOLOGIES HC... NOISE SINK HC
 
PSH Price: $23.00

Quantity in Stock:1

Product Code: MMTHC

Description
 
NOISE SINK HC
Features
  • Maximize Radio Range -
  • - Prevent/Eliminate Glitching -
  • The NoiseSink is a high-quality electromagnetic filter that plugs in between the motor controller and the receiver. By blocking the electromagnetic noise generated by the motor and controller, the NoiseSink significantly increases the controllable (glitch-free) radio range of electric powered vehicles. In noisy, high-power RC systems, the NoiseSink will increase the radio range by a factor of 10 (see our measured data below).
  • The NoiseSink mates with all standard RC receiver/servo connectors. Placing the NoiseSink in line with the motor controller (ESC) blocks noise coming from the controller and the motor.
  • The NoiseSink is available in two versions; a low-current (LC) and a high-current (HC) version. A good rule-of-thumb for deciding which version of the NoiseSink to use is: if your vehicle uses micro-size servos (Hitec-56 or below), then you can use the NoiseSink-LC, which will provide you with the minimum-weight solution. For larger vehicles, the NoiseSink-HC is recommended.
  • The NoiseSink was designed for maximum noise-blocking effectiveness while ensuring that it does not block the desired control signals from the receiver. Our field tests, along with third-party tests, show a 10-fold improvement in glitch-free radio range for noisy, high power RC systems. The following measured data provides a better understanding of how the NoiseSink works. The measured common mode rejection curve plotted below shows that the NoiseSink blocks noise by about 20 dB (or a factor of 100) in the frequency range of most RC systems (35HMz and 72MHz). Transmitted radio power decreases as 1/r2, so the square root of 100 (which is 10) is the radio range improvement factor (this holds true as long as motor-generated electromagnetic noise limits radio range). The low differential mode attenuation indicates that signals sent from the receiver to the servos and other devices will not be blocked.

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Radio Control
Manufactures M > MULTIMODE TECHNOLOGIES (MMT)
Radio Control > Radios > Radio Accessories > Wiring Accessories
Manufactures M
Radio Control > Radios > Radio Accessories


TAMIYA ... LACQUER PAINT LP-48 SPARKLING SILVER 10 ML $3.80
FUTABA FRC321... FM RX XTAL 26.995 CHA1 $10.99
TAMIYA ... LACQUER PAINT LP-49 PEARL CLEAR 10 ML $3.80
FUTABA ... SERVO GROMMET SPLIT (20) $6.99
CASTLE CREATIONS CHANNEL18... BERG RX MICRO CRYSTAL, 72.150 $7.99
Fascinations Metal Earth ... LED DISPLAY BASE METAL EARTH $8.45
TAMIYA ... LACQUER PAINT LP-72 MICA SILVER $4.00
HACKER X40PRO... X40 X PRO SERIES CONTROLLERS $89.99
TAMIYA ... LACQUER PAINT LP-69 CLEAR YELLOW 10 ML $2.90