General features
•M5 blade size: 550 mm - 580 mm, tail blades 93 mm - 96 mm
•90%+ shared parts between M5 and M6
•Four stunning canopy options, including two new inverted colors: Cosmic Orange, Solar Yellow, Aurora Green, and Nebula Pink
•Built and tested for the hardest 3D flying styles
•12mm main rotor shaft, 6mm tail rotor shaft
•15 mm cyclic servos, 15 mm tail servo for M5
•20 mm cyclic servos, 20 mm tail servo for M6
•M5 can be crossgraded to 20 mm servos, if desired
•Light airframe weights of 1405 g (M5) and 1505 g (M6)
Frame features
•Battery rails integrated into side frame panel stack
•Low parts count airframe with light-weight aluminum main plate
•High-end chamfered carbon fiber lower frames
•Quick release latches for canopy and battery tray from M7
•Integrated wiring paths throughout the airframe
•Central main plate provides rigidity and ease of maintenance
•Motor carrier rails make setting gear mesh effortless
•Modular servo rack makes servo installation and wiring a breeze
•Auxiliary plate under ESC plate, receiver plate available in the back
•Pre-drilled ESC mounting holes for all major ESC brands
•Triple carbon plate reinforced tail boom mounting guarantees unparalleled rigidity
•Damped flight controller platform known from M7
Drivetrain Features
•FEA optimized main gear structure reduces bending under load by 25%
•Motor shaft lengths from 15 to 60 mm supported, ⌀ 6 mm
•11t, 12t, 13t, 14t and 15t pinions available
•15 mm tall gears guarantee quiet and efficient, yet durable power transfer
•115t main gear for M5 (Ratios 10.455, 9.583, 8.846, 8.214, 7.667)
•121t main gear for M6 (Ratios 11.000, 10.083, 9.307, 8.643, 8.067)
Tail features
•Downscaled M7 tail rotor with 6 mm tail rotor shaft and 5 mm spindle shaft
•28mm carbon fiber tail boom
•Single-piece aluminum tail housing
•Best-in-class tail performance, using the proven tail rotor design concept from M7
•Dynamic weights on the tail rotor reduce servo torques in flight
Tail rotor transmission ratio of 95/20 = 4.75:1
