FEATURES: Broad power band for a wide variety of airplanes including models    
            designed for .60 2-stroke and .90 4-stroke engines                 
          Redesigned cylinder head to match angled valve layout for steady     
            power at all times and a perfect balance between high combustion   
            and efficient cooling                                              
          Redesigned "Jet Stream" muffler with unique shape for more authentic 
            four stroke sound                                                  
          Same mounting dimensions, drive hub position and linkage position as 
            the O.S. FS-91 Surpass II, 61FX, 65LA, 75AX, 95AX and FS-110       
          Two year limited warranty through Hobby Services beginning at date of
            purchase                                                           
                                                                               
INCLUDES: O.S. Engines FS-95V Four Stroke Engine with Type F Glow Plug, Muffler
            Header Pipe with two Locknuts and Instruction Manual               
                                                                               
REQUIRES: Fuel: 5-20% nitromethane aircraft blend with 18% lubricant content   
          Propeller: Sport & Aerobatic 13x7-9, 14x6-8                          
                     Scale 15x6-8                                              
                                                                               
SPECS:      Carburetor Settings-                                               
          Needle Valve: 2-1/2 - 3 turns from fully closed                      
          Mixture Control Valve: Rotate until slotted head is flush with carb  
            body. After setting needle valve, rotate mixture control valve     
            approximately 45° clockwise to lean the mixture or 45° counter-    
            clockwise to richen mixture                                        
                                                                               
          Displacement: 0.951cu in (15.59cc)                                   
          Bore: 1.142" (29.0mm)                                                
          Stroke: 0.929" (23.8mm)                                              
          Practical RPM: 2,100 - 11,000RPM                                     
          Power Output: 1.7ps/10,000RPM                                        
          Weight: 20.88oz (592g)                                               
          Muffler Weight: 2.05oz (58g)                                         
          Crankshaft Size: 5/16-24                                             
          Height from bottom of Mounting Tab to Pushrod Cover: 3.8" (97.5mm)   
          Height from bottom of Crankcase to Pushrod Cover: 4.7" (119mm)       
          Distance from Carburetor to Drive Hub: 4.5" (115.7mm)                
          Distance/Mounting Hole Centers Same Side: 0.98" (25mm)               
          Distance/Mounting Hole Centers Opposite Side: 2" (52mm)              
          Mounting Hole Diameter: 0.16" (4.2mm)                                
          Distance from Drive Hub to end of Crankshaft: 1.5" (37.4mm)          
          Distance from Drive Hub to center of Engine: 2.6" (66.5mm)           
          Width at Mounting Tabs: 2.4" (61mm)                                  
          Width Below Mounting Tabs: 1.7" (42.6mm)                             
          Height/Mounting Tab Bottom to center of Needle Valve: 0.70" (17.8mm)